simple stress

英 [ˈsɪmpl stres] 美 [ˈsɪmpl stres]

网络  简单受力; 简单应力; 单纯应力

机械



双语例句

  1. A simple idea in a stress out and sometimes lonely city.
    在一个充满压力,有时颇感孤独的城市的一个简单想法。
  2. A simple normal or direct stress produces a certain elongation or contraction of the material.
    单纯的正应力使材料产生一定的伸长或缩短。
  3. Although their problems can make them worry, there are some simple ways to deal with stress.
    尽管他们的问题会使他的感到忧虑,但还是有一些简单的办法来处理这种压力。
  4. Just one simple workout can ease stress and anxiety.
    仅仅一种简单的锻炼就可以减轻紧张和焦虑。
  5. The real dike pattern can be approximately duplicated theoretically by the superposition of two very simple stress fields.
    实际岩脉式从理论上可以通过两个最简单的应力场的叠加复现。
  6. Among rule of virtue theory, Chu bamboo slips propose justice, loyal, intelligently, faith, holy, benevolence six moral to ruler while being simple, stress the characteristic that the Confucians run a country with ethics.
    在德治论中,楚简对统治者提出义、忠、智、信、圣、仁六德,突出儒家以伦理治国的特色。
  7. The finite element analysis of simple supporting beam stress property under the vertical loading effect
    竖向荷载作用下简支深梁受力性能有限元分析
  8. As the procedure is simple for stress in meridian direction, this paper only discusses how to use the cross-sectional method to determine hoop stress and other aspects of applications.
    由于壳体经向应力求解过程比较简单,本文只给出了如何应用截面法求解壳体环向应力,并举例说明了该方法在其它方面的应用。
  9. The effective analysis could be able to achieve towards ground surface settlement using plane calculation module with simple stress release, but homogeneous continuous structure which consider uniform reduction coefficient was not fit for structure inner force's calculation.
    采用简单的应力释放的平面计算模式可以实现对地表沉降的有效分析,但考虑统一折减系数的均质连续结构不太适合于结构内力的计算。
  10. Using the concept of crack mouth widening energy release rate, a very simple method to determine stress intensity factors for cracked composite cylinder is proposed.
    利用裂纹张开能量释放率建立一个求解复合圆柱钱币裂纹应力强度因子的方法。
  11. A Simple Method for Determining Stress Function
    确定应力函数的一个简便方法
  12. BSS, which has many merit such as simple stress, nice facade, convenience construction etc, had a fast speed of developing and a wide field to make use, except for long-span roof, glass curtain wall and so on.
    它受力明确,造型轻盈,施工方便,富有时代气息等优点,是近几年发展起来的大跨度钢结构,一般用于大跨屋盖,还可用于墙体结构如玻璃幕墙的立柱。
  13. A Simple Method for Temperature Stress Calculation of Concrete Box Bridge under Sun Light
    混凝土箱形截面桥梁日照温度应力简化计算
  14. For this type of bridge, the structure is simple, the stress is easy to analyze, and the construction period is short, which has great competition among large and middle span bridges.
    该桥型结构简单明了,受力明确,施工周期短,在大中跨径桥梁中具有一定的竞争力,本文以湖北省卡子湾大桥为工程依托展开研究,具有重要的理论意义和工程意义。
  15. This new shear has simple structure, reasonable stress, high rigidity, long service life and convenient mainteance compared with low shaft floatation disc fly shear.
    与下轴浮动式圆盘飞剪相比,该新型剪机的结构简单,受力合理,刚度及剪刃寿命提高,且维修方便。
  16. The major diameter pile in hand-dug hole has been widely used recent years throughout the country and it has its advantages such as clear stress, simple calculation, high-bearing stress of single-pile, easy construction and low cost.
    大直径人工挖孔扩底桩近几年来在全国各地广泛应用,其优点是受力明确,计算简单,单桩承载力高,施工简便,造价低等。
  17. A simple method for obtaining stress intensity factors of cracks near circle holes
    圆孔附近裂纹应力强度因子的一种简便求法
  18. Simple solution of stress function for beams with narrow rectangular cross-section
    狭长矩形截面梁应力函数的简便求法
  19. Using experimental stress-strain curves in various simple stress states, generalized effective stress-strain formulae may be derived correspondingly in various forms.
    用不同的简单应力状态下的应力-应变试验曲线,可以得到不同的广义等效应力-应变关系。
  20. Under the same relative density, body-centered cubic hollow sphere foams were 11.2% and 2.2% larger than simple cubic lattice in stress and modulus.
    相对密度相同时,体心立方结构多孔材料的抗压强度与弹性模量分别比简单立方结构提高了11.2%和2.2%。
  21. Simple Analysis of Environmental Stress Screening and Environmental Test for Electronic Products
    电子产品的环境应力筛选与环境试验简析
  22. This method meets the requirements of national standard and international rules, and is very convenient to be adopted for the LBB analysis of some pressure vessels and piping with simple stress distribution and geometrical shape or for the estimation of LBB features of components.
    这种方法使用方便,而且满足有关的国家标准和国际规范的要求,适用于一些应力分布和几何形状比较简单的管道和压力容器,或用于LBB性质的近似估计。
  23. Through a simple manipulation, the stress expressions are presented and the differential equilibrium equations and all stress boundary conditions are satisfied. The solutions for these stresses are obtained by the stress variation method.
    通过简单计算推导出满足其全部应力边界条件与平衡微分方程的应力表达式,并用应力变分法求得其解答;
  24. Moreover, the activity of SOD was raised under the simple saline stress, but decreased under the alkaline stress and mixed salt-alkaline stress, while that of POD and CAT increased under the three stresses.
    SOD活性在盐胁迫下升高,在碱胁迫和盐碱混合胁迫下下降,POD和CAT活性在3种处理下均升高;
  25. These four models 'parameters can be determined conveniently by tests with simple stress path.
    所建立的模型可以通过简单应力路径下的试验测定模型参数。
  26. The number of parameters in this model is moderate and all of them have the defining mechanical meanings. The value of these parameters can be calibrated by the conventional triaxial test with simple stress path in laboratory.
    该模型引入的结构性模型参数数量少,均具有明确的物理意义,且可以通过简单应力路径的室内常规三轴试验确定。
  27. The purpose of this paper is to develop a simple and accurate lumber stress grading test machine, performance prediction should stress grading test machine, reduce mechanical stress grading costs, promote mechanical grading technology.
    本论文的目的在于以研制简易精确的锯材应力分等试验机,预测应力分等试验机的性能,降低机械应力分等成本,推广机械分等技术。
  28. Because of its simple structure and reasonable stress, the long multi-span PC continuous beam bridge is widely used.
    桥梁结构中预应力混凝土连续梁桥因其结构简单、受力合理而得到了广泛的应用。
  29. A simple experiment based on stress induced sampling chirp is demonstrated to test the principle of dispersion slope compensation by SBG.
    简单的应力调谐实验初步验证了取样啁啾可以进行色散斜率补偿的原理。
  30. Using a framework for an example, this paper analyzes the simple loads bar stress strain rule, through the change section height, the shear displacement of the influence of vertical displacement.
    最后以一三维框架为例,分析了简单荷载作用下杆件应力、应变规律,通过改变截面高度,研究了剪切位移对竖向位移的影响。